Connect with us

Published

on

Many of us recall the days when gigabytes (let alone terabytes) were unheard of, but in 2021, data storage is dirt cheap and only getting cheaper. If, like many techies, you’re not too keen on trusting your digital goodies to online cloud storage — which is just someone else’s computer, if we’re being frank — then a good external hard drive is what you need to keep your treasures safe. Today’s external HDDs are fast, reliable, and come in pretty much all sizes, from large desktop RAID arrays to palm-sized portable SSDs you can slip into a pocket. Whatever you’re looking for, though, we’ve got it right here in this all-in-one roundup of the best cheap external hard drive deals available this month:

Today’s best external hard drive deals

How to choose an external hard drive

The first two steps of choosing an external hard drive are setting your budget and determining what size you need. As cheap as storage is per gigabyte in 2020, the classic trade-off of hard drive size versus portability still holds; basically, is your primary consideration storage space or physical size? If your external hard drive is for home and office use at a single workstation and will more or less sit in one place, then storage space is more valuable than mobility. If, on the other hand, you’re frequently ferrying data around from one PC to the next, then a portable hard drive might be a better choice, even if you’re sacrificing some storage space for a smaller footprint.

What exactly you are using your hard drive for will also factor into your purchase decision. If your external HDD or SSD is just for file storage, then this is rather simple, but if you’re going to be regularly reading and writing to your external storage (for example, doing video editing right from the drive itself rather than from your computer’s system drive), you’ll want to be sure you get something that has good read and write speeds and that uses up-to-date connectivity standards such as USB 3.0. For more details about external hard drive designs and features to look for when making your purchase decision, read on.

HDD vs. SSD

Storage drives mostly fall into two main categories: traditional hard drives, or HDDs, and solid-state drives, or SSDs. Most hard drives, until recently, were mechanical HDDs. These have moving disks (called platters) inside, where the data itself is written and read. These traditional hard drives have largely fallen out of favor for use as system drives, but their larger capacities and much cheaper per-gigabyte cost means they are still a very popular choice for external storage use.

In recent years we have witnessed the solid-state drive revolution. These drives are basically a type of flash memory, where data is written onto chips rather than magnetic platters — that means no moving parts, which in turn means faster read/write speeds as well as (in theory) increased long-term reliability. However, these drives are typically smaller and considerably more expensive per gigabyte than HDDs; the trade-off is that they are what you’ll typically find when looking for portable external hard drives that are small enough to carry around in your pocket.

There are also hybrid hard drives, sometimes called SSHDs. These hybrid drives are essentially HDDs that feature built-in flash storage (usually a fairly small amount) where your most-used files are stored and read, combining much of the responsiveness of SSDs with the larger storage capacity of HDDs. These could be worth the price if you need the boosted storage of an HDD but expect to actively read and write to the external drive a lot.

Are all external hard drives SSDs?

Pretty much any hard drive can be used as an external drive with an appropriate hard drive enclosure, and these are available as both SSDs and HDDs. Although SSDs are quickly replacing HDDs for use as internal system drives (the hard drive inside your PC where your operating system and other software are installed), HDDs still remain hugely popular for external use since they are much, much cheaper per gigabyte and thus give you a lot more storage capacity for your dollar.

Are external hard drives reliable?

An external hard drive is simply any HDD or SSD — just like the ones found in laptops and desktop PCs — that’s inside an external enclosure. This enclosure features some means of connecting the hard drive to your computer or another device, usually a USB port, and may also (depending on its size) have some sort of power adapter. What that means is that an external hard drive will be about as reliable as any internal hard drive so long as it comes from a reputable manufacturer. Stick with proven makers like Western Digital, Seagate, SanDisk, Samsung, and Kingston, and your data should be in safe waters.

Are external hard drives fast?

A very important thing to consider is read and write speeds (the speeds at which data is downloaded from and uploaded to the hard drive), but this is less of a potential pitfall than it was in the past. Even traditional rotary hard drives (HDDs) offer pretty solid read/write speeds today, with 7,200rpm being the standard. Be sure to double-check this and avoid any that use the older 5,400rpm standard, although these are less common now. Solid-state drives naturally offer the best read/write speeds, but, as explained above, offer the least value per gigabyte.

Also, don’t overlook connection speeds. The fastest read/write speeds will be bottlenecked when transferring data over a connection that uses an older standard like USB 2.0. Make sure your external hard drive uses at least USB 3.0 (which is about ten times faster than USB 2.0 by comparison).

Do external hard drives need power?

Hard drives are electronic devices that need power from some external source, but that’s not to say that all external hard drives need to be plugged into a wall. Most can typically draw enough power over the same USB connection that they use for transferring data, but larger HDDs may require an external AC adapter that will come with the hard drive. This isn’t a huge problem for most but it is something to be aware of if power outlets are prime real estate where you’re going to be setting up your drive.

Looking for more great stuff? Find tech discounts and much more on our curated deals page.

We strive to help our readers find the best deals on quality products and services, and we choose what we cover carefully and independently. The prices, details, and availability of the products and deals in this post may be subject to change at anytime. Be sure to check that they are still in effect before making a purchase.

Digital Trends may earn commission on products purchased through our links, which supports the work we do for our readers.

Editors’ Recommendations

Naabiae Nenu-B is a Medical Health Student and an SEO Specialist dedicated to flushing the web off fake news and scam scandals. He aims at being "Africa's Best Leak and Review Blogger" and that's the unwavering stand of Xycinews Media.

Advertisement
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Leaks

How to Install Flexible Hose

Published

on

Unlike standard metal tubing, flexible hoses allow motion between two end points for easier routing over, under, through, or around obstacles. They’re often used to transport corrosive or flammable fluids and operate under high pressure, so it’s crucial to install them correctly.

Only competent qualified experts should attempt to install flexible hoses to ensure they meet the relevant standards for safe operation. It’s essential to choose the correct type of hose and hose fittings for the specific application and location, or you may be looking at disastrous consequences.

For example, a stainless steel hose would be suitable for gases or liquids under high temperatures and pressures, ideal for use in heating or ventilation and the automotive or power generation industries. Meanwhile, a composite hose would be the best choice for working with petrochemicals due to its higher resistance against corrosion.

Once you’ve identified which type of flexible hose is appropriate for your usage, read this guide on installing flexible hoses to ensure that they meet or exceed the required parameters and that your configuration doesn’t limit their lifespan.

Flexible hose installation checklist

Follow this straightforward run-through to make sure your flexible hose is fitted correctly.

  • Check there is no visible damage to the flexible hose prior to installation.
  • Make sure the hose is a sufficient length to create a smooth curve without stretching or twisting.
  • Use the appropriate type and size of tools to secure the fittings.
  • Allow some slack on the straight ends of the hose, as over-tightening can cause stress corrosion cracking.
  • Do not bend hoses near the fittings. If there’s a tight bend required, use elbow fittings to join hoses instead.
  • Ensure the ends are sealed securely, especially for insulated hoses where a build-up of moisture can cause them to fail.
  • Check that the hose isn’t rubbing against any other surfaces in its installed position.
  • Flush the circuit to clear any debris and pressure test to make sure all connections are secure.

Hose assemblies should undergo periodical inspections to identify any issues before serious failures potentially occur. Look out for the following:

  • Frayed or bulging steel braiding
  • Deformations such as twisting or flat spots
  • Slippage, cracks, or dents
  • Loose fitting attachments or covers
  • Contact with adjacent piping or machinery
  • Indications of corrosion

If you notice that any of these faults are present, repairs or replacements will be needed.

Tips for installing flexible hose

There are several common causes of flexible hose failure that should be avoided at all costs. By following these tips, you’ll make sure that your hose installation is secure, effective, and long-lasting.

Handle flexible hose with care

Lift and carry metal hoses carefully to prevent abrasions prior to installation – never drag them along the floor or let them make contact with other objects or materials in the vicinity.

When not in use, flexible hoses should be stored away from fumes and potential spillages, such as sprays and weld splatter.

Avoid torque

Torque distorts the hose and creates more stress on the twisted area, reducing its strength and eventually resulting in premature failure.

Only bend the hose gently into a natural curve rather than twisting laterally. Avoid accidental torque by holding the hose in place while the fittings are tightened.

No out of plane flexing

You can avoid twisting the hose and damaging wire reinforcement by only bending the hose in one plane. If the hose is bent in multiple planes, it reduces the hose’s pressure capacity.

Alternatively, you can use multiple sections of hose coupled and clamped between bends if multi-plane bending is unavoidable in the installation space.

No axial extension or compression

Flexible hoses must be properly anchored and supported to absorb movement, as excessive weight will compress the hose and relax the tension.

This puts the assembly at accelerated risk of structural failure if the hose is not appropriately guided.

No sharp bends or over-bending

Do not exceed the recommended bend radius of the product, because bending in multiple places and too close to fittings creates excessive strain that can result in leakage from fatigue cracks.

To prevent over-bending and sharp bends, allow extra length for expansion and contraction when cutting the hose and use elbow fittings or swivel joints to connect smaller sections of hose.

Always provide adequate support and protection

When bent into a curve, both ends of the hose must be supported to prevent sagging. However, you should never over-tighten the fittings to keep the ends straight, as this restricts movement and can result in bulging.

You should use clamps on the fittings to hold the hose in place away from adjacent surfaces, and consider protective hose covers as an extra defence against abrasion.

Route hoses appropriately

Plan the hose routing in advance as much as possible to avoid stacking hoses or twisting them around each other.

Cluttered hose assembly isn’t only unpleasant to look at, but it also causes abrasion and makes safety maintenance much harder.

You should also prevent external exposure to excessive heat or corrosive or flammable chemicals that can damage the outer surface.

Continue Reading

Leaks

How to Log in to Linksys Extender and Access the Setup Page?

Published

on

Internet lovers are increasing rapidly day by day and that is why Linksys WiFi range extender comes into the picture. This device allows netizens to enjoy the blazing-fast WiFi speed on their devices that are connected to Linksys extender setup-xxx network. Sometimes, the Linksys extender setup process can be a daunting task for 90 percent of users. If you are also having trouble while accessing the Linksys extender setup page, then here’s the list of some effective fixes that will help you log in to your device and access the setup page in a hassle-free way.

Without wasting much time, let’s get started!

Steps to Access the Linksys Extender Setup Page 

To tweak various settings on your Linksys extender, it is important for you to access its web-based setup page. In order to initiate the setting changes, you need to access the Linksys extender login page. Walk through the steps listed below and know how to make the Linksys extender login process an easy task.

Connect Your Linksys Extender to Your Router

To access the web-based setup page of your Linksys extender, you need to connect it to your router using an Ethernet cable.

Once you’re done, plug in your Linksys extender and power it on. Do not proceed until and unless you see a stable green LED on your Linksys WiFi range extender.

Open a Web Browser to Access the Linksys Extender’s Web-based Setup Page

As soon as you are done with the process of connecting your Linksys extender and router, the next thing you need to do is to open a web browser on a PC or laptop.

Pro Tip: To prevent Linksys extender login issue, you are advised to use an up-to-date internet browser only. Besides, clear junk files and browsing history also.

Connect to Linksys Extender’s WiFi

To reach the Linksys extender login page and access its setup page without any hassle, you need to connect your device to the Linksys extender’s WiFi.

Use the Default Web Address

To log in to your Linksys extender, you need its default web address, i.e. extender.linksys.com. In case you are not aware of the web address, see the Linksys extender manual or contact us right away.

After getting the Linksys extender’s default IP address, type it into the address bar of your internet browser. Make sure you type the web address correctly. Thereafter, press the Enter key on your keyboard and you will be taken to Linksys extender login page.

Pro Tip: You can also use the default Linksys extender IP address to access the login page. See the Linksys extender manual for the default IP address.

Enter the Linksys Extender Login Credentials

Once you reach the login page of your Linksys extender, you need to enter its default username and password in the given fields and hit the Log In button.

Note: If you have changed the login details at the time of Linksys extender setup, bear in mind that the default ones will no longer work. So, make sure to use the correct Linksys extender login credentials.

Access the Linksys Extender’s Web-based Setup Page

After following the steps listed above in the exact given order, you would be able to access the web-based setup page of your Linksys extender. Now, navigate to the settings page of your extender and make changes as per your needs.

Endnote

Our guide on how to log in to Linksys extender and access the setup page ends here. We hope that you will now get access to the web-based setup page after successful Linksys range extender login. On the off chance if the steps listed above don’t help you make the most out of your Linksys extender, seek help from our expert technicians and let them fix all your extender-related problems in no time. 

Continue Reading

Leaks

Why Am I Not Able to Perform Netgear Extender Login?

Published

on

Accessing your Netgear WiFi extender’s web admin panel allows you to configure its advanced settings. And if that’s exactly what you aren’t able to do, the following reasons might be acting as a barrier in your way:

  • Weak internet connection
  • Poor connection between extender and router
  • Corrupted or outdated firmware
  • The hardware of your extender is age-old
  • The LED light on your device isn’t green

To stop these reasons from letting you perform Netgear extender login, mentioned below are the troubleshooting tips you need to follow:

Know How to Access the Netgear Extender Login Page

  1. Ensure Your Device Has Access to a Strong Internet Connection

One of the major reasons why you’re facing issues while trying to log into your Netgear extender is because of a weak internet connection. Thus, make sure that your WiFi device has access to a strong internet connection. 

If you are still skeptical about the internet issue, it is recommended that you get in touch with your Internet Service Provider (ISP). Chances are that the internet issue is from their end. In case it is, they’ll send an agent over to your house to help you fix the issue at hand. 

  1. Check the LED Light on the Netgear WiFi Range Extender

After you powered on your extender, did you check the status of the LED light? No? Perhaps you proceeded further without waiting for the LED to turn green. And, that’s where you went wrong! 

To troubleshoot this issue, you need to power cycle your Netgear range extender. It might help! Follow the instructions mentioned below to power cycle your WiFi device:

  • Disconnect all the extra devices connected to your extender.
  • Power off the Netgear extender and unplug it from the wall socket.
  • Reconnect the extender to the power source.
  • Now, wait for the LED light to become green. 

Once the LED light turns green, try to access the Netgear extender setup page. Still no luck?

  1. Check the Connectivity Between the Extender and WiFi Router

Another thing that you can do in order to successfully log into your device is to check the connection between the extender and router. There is a possibility that your extender isn’t well connected to the router, thereby causing all the fuss. 

Therefore, disconnect both your WiFi devices and reconnect them. We recommended you to connect your devices using a wired source rather than a wireless source. It’s a safer option in comparison. 

  1. Update the Firmware of Your Netgear Range Extender

One of the reasons why you aren’t able to log into your Netgear extender is because of a corrupted or outdated firmware. Therefore, the next time you try to access the web admin panel of your device, perform Netgear firmware update first. 

Updating the firmware of your extender will reduce the chances of login failure. So, waste no time in accessing the Settings of your WiFi device and updating its firmware. 

  1. Restore Your Extender to its Factory Default Settings

Last but not least, resetting your device can also help you in accessing the Netgear extender login page without any hassle. In order to restore your extender to its factory default settings, mentioned below are the guidelines you need to follow:

  • Power on your Netgear WiFi extender.
  • Connect the extender to the WiFi router.
  • Look for the Reset button on your device.
  • Once found, take an oil pin and carefully press it.
  • Hold the Reset button for a couple of seconds before releasing it. 

Once you reset your Netgear extender, try to access its web admin panel. Are you able to? If yes, feel free to share your experience with us through the comments section below. 

Continue Reading

Trending

  • bitcoinBitcoin (BTC) $ 34,792.00
  • ethereumEthereum (ETH) $ 1,993.69
  • tetherTether (USDT) $ 1.00
  • binance-coinBinance Coin (BNB) $ 310.54
  • cardanoCardano (ADA) $ 1.36
  • dogecoinDogecoin (DOGE) $ 0.264793
  • xrpXRP (XRP) $ 0.675311
  • usd-coinUSD Coin (USDC) $ 1.00
  • polkadotPolkadot (DOT) $ 16.35
  • binance-usdBinance USD (BUSD) $ 1.00
  • uniswapUniswap (UNI) $ 18.13
  • bitcoin-cashBitcoin Cash (BCH) $ 486.04
  • litecoinLitecoin (LTC) $ 134.42
  • solanaSolana (SOL) $ 31.86
  • chainlinkChainlink (LINK) $ 19.13
  • matic-networkPolygon (MATIC) $ 1.21
  • theta-tokenTheta Network (THETA) $ 7.30
  • wrapped-bitcoinWrapped Bitcoin (WBTC) $ 34,784.00
  • stellarStellar (XLM) $ 0.268254
  • ethereum-classicEthereum Classic (ETC) $ 43.37
  • vechainVeChain (VET) $ 0.081012
  • daiDai (DAI) $ 1.00
  • tronTRON (TRX) $ 0.066264
  • internet-computerInternet Computer (ICP) $ 35.23
  • filecoinFilecoin (FIL) $ 57.27
  • moneroMonero (XMR) $ 222.76
  • eosEOS (EOS) $ 3.90
  • shiba-inuShiba Inu (SHIB) $ 0.000007
  • compound-usd-coincUSDC (CUSDC) $ 0.022121
  • amp-tokenAmp (AMP) $ 0.063919
  • cdaicDAI (CDAI) $ 0.021555
  • okbOKB (OKB) $ 10.48
  • klay-tokenKlaytn (KLAY) $ 1.12
  • aaveAave (AAVE) $ 212.13
  • algorandAlgorand (ALGO) $ 0.871621
  • pancakeswap-tokenPancakeSwap (CAKE) $ 13.97
  • theta-fuelTheta Fuel (TFUEL) $ 0.490544
  • crypto-com-chainCrypto.com Coin (CRO) $ 0.101446
  • cosmosCosmos (ATOM) $ 10.37
  • bitcoin-svBitcoin SV (BSV) $ 131.95
  • neoNEO (NEO) $ 35.09
  • celsius-degree-tokenCelsius Network (CEL) $ 5.73
  • tezosTezos (XTZ) $ 2.82
  • compound-ethercETH (CETH) $ 40.00
  • leo-tokenLEO Token (LEO) $ 2.44
  • ftx-tokenFTX Token (FTT) $ 26.40
  • iotaIOTA (MIOTA) $ 0.828054
  • terra-lunaTerra (LUNA) $ 5.45
  • makerMaker (MKR) $ 2,254.00
  • avalanche-2Avalanche (AVAX) $ 11.52
error: Content is protected !!